In the dongzheng 24v dc motors family, cycloidal pin wheel dongzheng 24v dc motors is widely used in servo, stepper, DC and other transmission systems because of its small size, high transmission efficiency, wide deceleration range, and high precision. The correct installation, use and maintenance of dongzheng 24v dc motors is an important part of ensuring the normal operation of mechanical equipment. Therefore, when installing dongzheng 24v dc motors, please be sure to carefully assemble and use in strict accordance with the following installation and use related matters.
First, confirm whether the motor and dongzheng 24v dc motors are intact before installation, and strictly check whether the dimensions of various parts connected to the motor and dongzheng 24v dc motors match. Here are the dimensions and fitting tolerances of the motor's positioning boss, input shaft and dongzheng 24v dc motors groove.
Second, unscrew the screws on the dust hole outside the dongzheng 24v dc motors flange, adjust the PCS system clamping ring so that its side holes are aligned with the dust hole, insert the hex and tighten. After that, remove the motor shaft key.
Third, connect the motor with dongzheng 24v dc motors naturally. When connecting, it must be ensured that the output shaft of dongzheng 24v dc motors and the input shaft of the motor have the same concentricity, and the outer flanges of the two are parallel. If the concentricity is inconsistent, it will cause the motor shaft to break or the dongzheng 24v dc motors gear to wear.
Before connecting the motor with dongzheng 24v dc motors, the key way of the motor shaft should be perpendicular to the tightening bolt. During installation, it is strictly forbidden to hit with a hammer to prevent excessive axial or radial force from damaging the bearing or gear. Be sure to tighten the mounting bolt before tightening the force bolt. The correct installation between dongzheng 24v dc motors and mechanical equipment is similar to the correct installation between dongzheng 24v dc motors and drive motors. The key is to ensure that the dongzheng 24v dc motors output shaft has the same concentricity as the driven part of the shaft.
dongzheng 24v dc motors https://www.dydzmotor.com/32mm-24v-dc-planetary-gear-motor.html
Share this page with your family and friends.